2004 Aprilia RS 50

Front Brake binding but not excessively (1.2.1 (f))

Front Indicator tell tale inoperative (4.9.1 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Position lamp switch insecure (4.2.2 (b))

Nearside Steering operation impeded by a fairing (2.1.4 (e))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Rear wheel bearings have slight free play (2.4.A.2c)

Chain guard lightly rubbing lower fairing (6.2.1c)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

Tyre worn close to the legal limit (4.1.3(ii))

Registration plate incorrect (6.3.1a)

Chain guard lightly rubbing lower fairing (6.2.1c)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

Tyre worn close to the legal limit (4.1.3(ii))

Nearside swithgear fouling clutch lever

Offside mirror broken

clutch lever broken

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front mudguard insecure (2.3.7)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Nearside swithgear fouling clutch lever

Offside mirror broken

clutch lever broken

Front Brake hose excessively chafed (3.2.B3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Handlebar mounting clamp bolt loose (2.1.1a)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering control handlebar movement restricted by taut cables (2.1.2c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Brake pedal pivots slightly worn (3.1.3a)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

gear lever pivet worn

rear foot rest

rear no plate lose on mounting & started to defuse

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Brake pipe union leaking fluid (3.2.B4)

Drive chain worn to excess (6.2.1e)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake hose excessively chafed (3.2.B3a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Offside Front Direction indicators not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever pivots slightly worn (3.1.3a)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

o/s hand bar bent

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)