2008 Kawasaki Zx 1000 E8F

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit at limit (5.2.3 (e))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

front mudguard missing but doesnt affect bracing

Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))

Direction indicator not working (4.4.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

front mudguard missing but doesnt affect bracing

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Lower exhaust bolt missing

Lower exhaust bolt missing

Registration plate does not conform to the specified requirements small (0.1 (d))

Exhaust slightly loose Missing center hanger plate bolt (6.1.2 (a))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))