2005 Mitsubishi Evolution

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Play in steering rack inner joint(s) ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear trailing arm mounting (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside rear trailing arm mounting (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear both sides (6.1.1 (c) (i))

nearside rear driveshaft oil seal leaking but not excessively

Exhaust fumes entering cabin front pipe to catalyst bolts missing (6.1.2 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Windscreen washer provides insufficient washer liquid washer jet blocked (3.5 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear trailing arm mounting (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside rear trailing arm mounting (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear both sides (6.1.1 (c) (i))

nearside rear driveshaft oil seal leaking but not excessively

Nearside Washer jet defective

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)