2005 Derbi Senda

All direction indicators missing (4.4.1 (a) (ii))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Front Position lamp not working (4.2.1 (a))

Headlamp aim too high (4.1.2 (a))

Horn not working (7.7 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Shock absorber has a serious fluid leak (5.3.2 (b))

Stop lamp not working with brake leaver (4.3.1 (a) (ii))

Throttle operating incorrectly (6.2.7 (a) (i))

Tyre not fitted in accordance with side wall instructions tyre flat (5.2.3 (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Brake lever worn, but not excessively bent (1.1.15 (b))

Engine mounting/bracket damaged but not to excess (6.1.8 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

front tyre slight cracking

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Direction indicator incorrect colour both (1.5.1b)

Headlamp aim not tested (1.6)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever shortened. (6.2.1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

front tyre perished/cracking

Horn not working (1.7.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Clutch lever shortened. (6.2.1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

front tyre perished/cracking

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate margin less than the minimum requirement (6.3.4g)