MOT Status
ExpiredMileage
74,808 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust system not adequately supported (7.1.1)
Centre Exhaust system not adequately supported (7.1.1)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Nearside Side repeater not working (1.4.A.2c)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
general corrosion all over body
n/s/r tyre perished
o/s/f door step corroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
General conidition of the vehicle is very corroded
Body insecure and dangerous to other road users (6.1.B.1b)
Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Emissions not tested (7.0)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Side repeater not working (1.4.A.2c)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
General conidition of the vehicle is very corroded
Body is very badly corroded but not within 30cm of mounting
General suspension components all have general surface corrsion.
An item not tested (Manual)
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim too high (1.8)
Offside Headlamp not working on main beam (1.7.5a)
Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Body is very badly corroded but not within 30cm of mounting
General suspension components all have general surface corrsion.
n/s and o/s door steps corroded
radiator supports corroded
water storage tank insecure
Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
all over body has slight corrosion
Front Exhaust system not adequately supported (7.1.1)
Front registration plate deteriorated (6.3.1d)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Direction indicators not working (1.4.A.2c)
Offside Headlamp aim too high (1.8)
Parking brake lever ratchet mechanism is broken (3.1.5)
Windscreen washer provides insufficient washer liquid (8.2.3)
Body has slight corrosion (6.1.B.2)
Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
n/s and o/s door steps corroded
radiator supports corroded
water storage tank insecure
both front door steps badly corroded but not within 300mm of seat belt
front registration plate becoming unclear
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Side repeater not working (1.4.A.2c)
Offside Windscreen wiper blade insecure (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
both front door steps badly corroded but not within 300mm of seat belt
front registration plate becoming unclear
Front brake disc slightly pitted (3.5.1h)
Nearside front panel badly corroded
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Brake pipe excessively corroded (3.6.B.2c)
Exhaust mounting missing (7.1.1b)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Front brake disc slightly pitted (3.5.1h)
Nearside front panel badly corroded
All position lamps not working (1.1.A.3b)
Centre Exhaust system not adequately supported (7.1.1)
Front Exhaust system not adequately supported (7.1.1)
Nearside Front Headlamp aim too low (1.6.D2)
Offside Front Headlamp aim too low (1.6.D2)
Rear Exhaust system not adequately supported (7.1.1)
Rear Registration plate lamp not working (1.1.5c)
both rear half shafts have slight sideway play
nearside front king pin has slight play
How Reliable is the Mercedes Camper?
Based on 8,342 MOT tests across 487 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ETT 916Y is a 1983 Mercedes Camper in White with a 2,277cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 46.2%.
Across all 1983 Mercedes Camper models, the average MOT pass rate is 71.3% with a typical mileage of 108,825 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes Camper fails its MOT is fog lamp not working, accounting for 155 recorded failures. If you're considering buying ETT 916Y, it's worth having these areas checked by a mechanic before committing.
The Mercedes Camper typically stays on UK roads for around 47 years. At 43 years old, this Mercedes Camper is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ETT 916Y?
You can check the full history of ETT 916Y by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ETT 916Y registered?
ETT 916Y is a 1983 Mercedes Camper, first registered on 1 May 1983.
Is ETT 916Y safe to buy?
The MOT history for ETT 916Y shows 13 tests with a 46.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ETT 916Y have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ETT 916Y. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.