2016 Honda Msx

Exhaust noisy (8.1.1 (a))

Front Side stand pivot bolt loose but secure

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Tyre worn close to the legal limit Very (5.2.3 (e))

Rear Drive chain slightly tight (6.1.7 (k) (i))

Rear O/schain adjuster nut loose

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Front Indicator switch not able to be operated from the normal riding position switch fitted on center bar (4.4.2 (a) (i))

Nearside Rear no chain guard

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Central Rear Registration plate does not conform to the specified requirements bent out of position (0.1 (d))

Nearside Front Brake cylinder inadequately mounted up graded brake lever not corrected mounted (1.1.16 (c) (i))

Offside Front Lower Headlamp insecure bolt missing (4.1.1 (c))

Offside Rear Exhaust silencer insecure held with plastic cable ties / bolt missing (8.1.1 (b) (i))

Offside Rear Exhaust system insecure exhaust pipe bolt missing (6.1.2 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Front Indicator switch not able to be operated from the normal riding position switch fitted on center bar (4.4.2 (a) (i))

Nearside Front Stop lamp switch does not operate in accordance with the requirements rear brake lever fitted with no brake switch (4.3.2 (a) (i))

Nearside Rear no chain guard

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Central Rear Mudguard insecure ()

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Offside Motorcycle structure is fractured but structural rigidity is not significantly reduced foot peg bracket slightly bent (6.1.1 (a) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Front Headlamp aim too high (4.1.2 (a))

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Offside Motorcycle structure is fractured but structural rigidity is not significantly reduced foot peg bracket slightly bent (6.1.1 (a) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))