MOT Status
ValidMileage
126,380 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced door sills (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Tyre slightly damaged/cracking or perishing Both sides (5.2.3 (d) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Brake pedal anti-slip provision incomplete (3.3.A.1b) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Brake pad(s) wearing thin (3.5.1g)
Nail in offside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Nail in offside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN07 VDC is a 2007 Dodge Caliber in Red with a 1,798cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2007 Dodge Caliber models, the average MOT pass rate is 66.5% with a typical mileage of 66,005 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying EN07 VDC, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 19 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EN07 VDC?
You can check the full history of EN07 VDC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN07 VDC registered?
EN07 VDC is a 2007 Dodge Caliber, first registered on 12 July 2007.
Is EN07 VDC safe to buy?
The MOT history for EN07 VDC shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN07 VDC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN07 VDC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.