1996 Mitsubishi Colt

Brake performance unable to be tested engine cut out (1.2.1 (g))

Emissions unable to be completed engine cut out (8.2.1.2 (d))

Brake pedal has no servo assistance (3.3.B.2)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Headlamp aim too high (1.8)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Oil leak

body kit and sill covers fitted which restrict inspection of outer sill structure etc.

front flexi exhaust section is slightly damaged

non original engine is fitted so non cat test procedures followed for emmissions purposes

sports exhaust system is fitted which is slightly noisy.

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Fuel pipe insecure (7.2.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Oil leak

body kit and sill covers fitted which restrict inspection of outer sill structure etc.

front flexi exhaust section is slightly damaged

non original engine is fitted so non cat test procedures followed for emmissions purposes

sports exhaust system is fitted which is slightly noisy.

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

dampness around power steering and brake pipes no leak at time of test.

heavy damage to chassis rails.

non standard exhaust fitted.

o/s/f brake pipes starting to corrode.

floor to sill areas heavily corroded

offside front metal brake pipe corroded reccomend replacement

weld repairs heavily undersealed

Brake performance not tested (3.7.A.1)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Headlamp aim too high (1.8)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp tell tale not working (1.3.1b)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Service brake: efficiency below requirements (3.7.B.7)

both sides rear chassis rails heavily corroded and weak

offside front inner wheel arch cover very close to inner wheel arch on full lock

trims fitted to outer sills

underside of vehicle heavily corroded in places

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Front Mechanical brake component securing device missing (3.5.1i)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Registration plate lamp not working (1.1.5c)

both sides rear chassis rails heavily corroded and weak

offside front inner wheel arch cover very close to inner wheel arch on full lock

trims fitted to outer sills

underside of vehicle heavily corroded in places

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2c)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Offside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Body insecure and dangerous to other road users (6.1.B.1b)

Offside Registration plate lamp not working (1.1.5c)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Anti-roll bar linkage severely distorted (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Bonnet cannot be secured in the closed position (8.4.1) DANGEROUS

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both rear brake back plates corroded and weak

fuel tank breather pipe corroded

long travel on foot brake

long travel on hand brake only just passed mot test

stone chip in windscreen

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Offside Brake pipe leaking (3.6.A.1) DANGEROUS

Offside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)