1988 Honda CG125BR

Front Shock absorber has negligible damping effect (5.3.2 (b))

Brake clevis joint insecure Rear brake torque arm insecure. No locking device fitted . (1.1.15 (c))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Direction indicator obviously incorrectly positioned Less than 240mm apart and obscured by number plate. (4.4.3 (a))

Registration plate does not conform to the specified requirements Number plate broken . (0.1 (d))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy Slightly notchy. (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.2.1d)

headlamp been blanked off

no indicators fitted

rear position lamp masked

Clutch lever positioned so it cannot be readily operated. cable broken (6.2.1g)

Clutch lever positioned so it cannot be readily operated. mounting insecured (6.2.1g)

Horn not working (1.7.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

headlamp been blanked off

no indicators fitted

Direction indicators not working requires indicators to be fitted (1.5.1c)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Stop lamp affected by the operation of another lamp inop when side light on (1.3.2)

Rear reflector on motorcycle missing (1.4.1)

Front Brake lever has inadequate reserve travel (3.1.3b) DANGEROUS

Rear reflector on motorcycle missing (1.4.1)