2006 Fiat Doblo Cargo

Central Front Lower Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Lower (rear loading door corroded on lower edge)

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (Inner sill to jacking point corroded holed) (6.1.1 (c) (i))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (inner sill corroded holed) (6.1.1 (c) (i))

Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (Inner sill to jacking point corroded holed) (6.1.1 (c) (i))

Central Front Lower Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Lower (rear loading door corroded on lower edge)

Central Front Lower Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Rear Upper Tyre obviously under inflated (in spare wheel carrier) (5.2.3 (l))

Nearside Front (small chip in front windscreen less than 10mm)

Nearside Rear Lower (Rear lower loading door corroded on lower edge)

Offside Rear Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (not affecting emissions\ test plate of 1.10 ) (8.2.2.2 (c))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre (central of tread) ()

Rear Inner Tyre slightly damaged/cracking or perishing (both offside and nearside) (5.2.3 (d) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (front axle ) (1.2.1 (b) (i))

Front Outer Tyre worn close to legal limit/worn on edge (both offside and nearside) (5.2.3 (e))

Rear Inner Tyre slightly damaged/cracking or perishing (both offside and nearside) (5.2.3 (d) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (inner sill corroded holed within 30cm of rear front spring hanger) (6.1.1 (c) (i))

Rear Exhaust emissions exceed manufacturer's specified limit (excessive black smoke emmitted) plate 1.10k (8.2.2.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (front axle ) (1.2.1 (b) (i))

Front Outer Tyre worn close to legal limit/worn on edge (both offside and nearside) (5.2.3 (e))

Rear Inner Tyre slightly damaged/cracking or perishing (both offside and nearside) (5.2.3 (d) (ii))

Rear Inner Tyre slightly damaged/cracking or perishing (both offside and nearside) (5.2.3 (d) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (detected on shaker plates) (5.3.4 (a) (i))

Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Rear Upper Direction indicator incorrect colour (showing white to rear) (4.4.3 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (front arm FRONT bush detected on shaker plates) (5.3.4 (a) (i))

Offside Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Inner Tyre slightly damaged/cracking or perishing (both offside and nearside) (5.2.3 (d) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (front arm) front lower bush detected on shaker plates) (5.3.4 (a) (i))

Exhaust heavily corroded. Middle-rear

Offside Rear Nail in tyre ()

Various under body corrosion

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust heavily corroded. Middle-rear

Offside Rear Nail in tyre ()

Various under body corrosion

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Steering system excessively tight upper strut bearing siezed (2.2.D.1)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Stop lamp not working (1.2.1b)

Rear Lower engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Centre Stop lamp not working (1.2.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too low (1.8)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

near side number plate dim

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too low (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

osf tyre worn on inner edge

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

osf tyre worn on inner edge