2011 Ajs Dd 125 E 08

Steering movement slightly stiff (2.2.1a)

Brake hose fouling front brake hose gets trapped between forks and ignition lock,needs to be re-routed (3.2.B3b)

Front Hydraulic brake control feels spongy (3.1.4a)

Headlamp insecure (1.2.3b)

Headlamp switch insecure not fixed on handlebar,switch needs to be pegged. whole unit moves (1.2.4)

Nearside Indicator switch insecure not in a fixed position on bar,needs to be pegged (1.5.4)

Nearside Rear Direction indicator insecure bracket loose (1.5.3b)

Rear position lamp incorrect colour rear light lens loose,showing white light to back (1.1.2b)

Seat insecure pillion seat not fixed at front (6.2.1a)

Stop lamp emits other than a steady red light rear light lens loose,stoplight showing white to rear (1.3.1b)

Drive chain slightly tight (6.2.1d)

Steering movement slightly stiff (2.2.1a)

bike runs rough,firing on 1 cylinder,and knocking

front and rear tyre pressures were low and have been re-inflated for test

fuel tank missing 1 retaining bolt at front but remains secured by others

Direction indicator not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Brake master cylinder severely corroded (3.2.B1b)

Front Brake lever has inadequate reserve travel (3.1.3b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear reflector on motorcycle missing (1.4.1)

Throttle operating incorrectly (6.2.1f)

Exhaust noisy (7.1.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

engine excessively noisy,sounds dry

fuel tank front supporting bolt missing,tank is still secure

gear lever pivot worn,tie rod knuckles loose