2003 Aprilia MX50

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Forks modification unsafe (2.2.2 (e))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) DANGEROUS

Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) DANGEROUS

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a) DANGEROUS

Front Horn not loud enough to be heard by another road user (1.7.3a) DANGEROUS

Front Throttle operating incorrectly (6.2.1f) DANGEROUS

Rear Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

Rear Wheel alignment slightly misaligned. (2.5.1)

Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Upper Steering movement slightly 'notchy' (2.2.1a)

throttle very stiff to operate

Front Headlamp switch insecure (1.2.4)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Wheel alignment slightly misaligned. (2.5.1)

Upper Steering movement slightly 'notchy' (2.2.1a)

throttle very stiff to operate

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Wheel spoke slightly loose. (4.2.1b)

Brake component cracked but not seriously reduced in strength (3.2.A1)

Clutch lever shortened. (6.2.1g)

header tank cap missing

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not loud enough to be heard by another road user (1.7.3a)

Brake component cracked but not seriously reduced in strength (3.2.A1)

Clutch lever shortened. (6.2.1g)

header tank cap missing

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)