2008 Gilera Rcr

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

All position lamps adversely affected by the operation of another lamp (1.1.3b)

All position lamps adversely affected by the operation of the horn (1.1.3b)

Direction indicators affected by the operation of another lamp (1.5.1c)

Drive chain excessively tight (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Wheel damaged significantly reducing the original strength (4.2.1a)

Horn not loud enough to be heard by another road user (1.7.3a)

Lower Steering headbearing has excessive free play (2.2.2)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Wheel has an excessively distorted bead rim. (4.2.2)

Upper Steering headbearing has excessive free play (2.2.2)

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain worn but not considered excessive (6.2.1e)

Direction indicator not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Wheel spoke cracked. (4.2.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively tight (6.2.1d)

Headlamp aim too high (1.6)

Horn is not a constant note (1.7.3c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

radiator scoops missing front fastners, machine doesnt idle

Front wheel bearings have slight free play (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Indicator tell tale not functioning (1.5.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Offside Front Wheel has a slightly distorted bead rim. (4.2.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Offside Rear Direction indicators not working (1.5.1c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has excessive free play (2.4.A2a(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))