2004 Peugeot Jetforce

Slight interferance of throttle cable whwn turned lock to lock

Transmission oil leak on to tyres

Rear shock absorber has a light misting (2.4.A.1c)

Front Hydraulic brake control feels spongy (3.1.4a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Riders seat insecure (6.2.1a) DANGEROUS

Seat insecure (6.2.1a) DANGEROUS

Wheel alignment incorrect which adversely affects the handling (2.5.1) DANGEROUS

Motorcycle structure slightly insecure (6.1.1c)

Motorcycle structure slightly insecure (6.1.1c)

Motorcycle structure slightly insecure (6.1.1c)

Motorcycle structure slightly insecure (6.1.1c)

Rear position lamp damaged but function not impaired (1.1.1b)

An item not tested (Manual)

Headlamp insecure (1.2.3b)

Horn control defective (1.7.2a)

Indicator switch insecure (1.5.4)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e) DANGEROUS

Rear Tyre fouling another component (4.1.4) DANGEROUS

Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

both mirrors/switch housings insecure

rear lamp lense damaged

registration plate lamp not working

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front suspension assembly component cracked (2.3.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))