2003 Honda SH125

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Central Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Exhaust mounting deteriorated. (7.1.1.c)

rear as travel but not to the bars

Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear reflector damaged but function not impaired (1.4.2a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Floor brake test indicates a sticking brake (3.3.C2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))