2003 Honda SH125

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls Front n/w (4.3.2 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

FRONT MUDGUARD CRACKED AND HAS SHARP EDGES WOULD ADVISE TO ROUND OFF EDGES

Steering movement slightly 'notchy' (2.2.1b)

rear brake adjustment

Front mudguard is broken and has sharp edges

Nearside Front Floor brake test indicates a binding brake (3.3.C2c)

Nearside Front Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Front mudguard is broken and has sharp edges