2014 Kymco Zing

Exhaust system insecure (6.1.2 (a))

Motorcycle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i))

Position lamp not working Rear position light not working (4.2.1 (a))

Registration plate insecure (0.1 (a))

Shock absorber has a serious fluid leak (5.3.2 (b))

Suspension arm damaged and seriously weakened (5.3.3 (b) (i))

Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Tyre tread depth is below minimum requirements of 1.0mm Front tyre at limit (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Brake back plate insecure split pin missing (1.1.14 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake caliper insecure (1.1.16 (c) (i))

Front Position lamp not working (4.2.1 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim too high (4.1.2 (a))

Nearside Front Footrest insecure (6.2.12 (a))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Position lamp incorrect colour orange (4.2.3 (a) (i))

Front beam bender used to correct aim pattern

Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))

Front Headlamp light intensity severely reduced dip beam (4.1.4 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Offside Front Brake caliper insecure bolts loose (1.1.16 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Position lamp incorrect colour orange (4.2.3 (a) (i))

Front main beam pattern appears to be a brighter dip beam /check wiring.

Nearside Drive chain slightly loose (6.1.7 (c) (i))

Front Headlamp aim too low (4.1.2 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Headlamp aim too high (1.6)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))