2006 Honda Cbf 1000 A-6

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear tyre worn slightly uneven

Headlamp switch does not immediately illuminate all main beam headlamps headlight dip high/low switch failed at start of mot, then began to work and remained working throughout the test. switch possibly needs cleaning (4.1.3 (a))

Steering headbearing slightly stiff or notchy steering slightly stiff with the weight on lower bearing, (2.2.2 (f) (i))

rear tyre worn uneven, but plenty legal.

Rear tyre worn slightly uneven and out of shape

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit getting low (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly loose (6.2.1d)

battery power low

Rear Drive chain slightly loose (6.2.1d)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)