2007 Mitsubishi Lancer

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Shock absorbers damaged to the extent that it does not function Spring holder failed due to excessive corrosion (5.3.2 (b))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Fuel Pipe/s corroded ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension component corroded but not seriously weakened All rear components (5.3.3 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened and both lower suspension arms (5.3.3 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Fuel Pipe/s corroded fuel tank pipes ()

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides and inner sill panels (6.2.2 (d) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Sub-frame corroded but not seriously weakened and both lower suspension arms (5.3.3 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Fuel Pipe/s corroded fuel tank pipes ()

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides and inner sill panels (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material both front to rear main pipes (1.1.11 (c))

Front Outer Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Sub-frame corroded but not seriously weakened both sills and inner sill panels (5.3.3 (b) (i))

Front Brake pipe corroded, covered in grease or other material O/s and n/s (1.1.11 (c))

O/s rear tyre cracking. O/s and n/s inner sills,chassis and front subframe and suspension arms slightly corroded.

Rear Brake pipe corroded, covered in grease or other material O/s and n/s (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material N/S and O/S (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material N/S and O/S (1.1.11 (c))

exhaust centre pipe heat shield insecure

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Anti-roll bar linkage repaired, but not inappropriately (2.4.A.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nail in nsf tyre