2020 Lexmoto Zsx

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Rear reflector missing Reflective tape is not an acceptable substitute for a rear reflector. (4.8.2 (a) (ii))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Suspension corroded but not seriously weakened fork stantions pitted (5.3.3 (b) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Rear cush drive rubber worn

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS