2003 Honda CB500

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim too low (4.1.2 (a))

Throttle operating incorrectly (6.2.7 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear slight perishing on rear tyre

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp aim too low (4.1.2 (a))

Headlamp aim too low and too far to the right (4.1.2 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear slight perishing on rear tyre

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Headlamp aim beam image kick up to the offside (1.6)

Rear Brake disc(s) cracked (3.2.A1g)

Nearside Rear Direction indicator not working (1.5.1c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))