2005 Honda Cbr

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Indicator tell tale inoperative (4.9.1 (a) (i))

front fairing could be more secure

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Indicator tell tale inoperative (4.9.1 (a) (i))

front fairing could be more secure

Exhaust noisy (8.1.1 (a))

Rear brake could be better

Front Brake binding but not excessively (1.2.1 (f))

Front Valve stem slightly damaged at base. (5.2.3 (j))

Drive chain slightly tight (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Drive chain slightly tight (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Headlamp aim too high (1.6)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Gearlever bent but still useable.

Only one head lamp working on high beam.

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear tyre under inflated.

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake disc(s) slightly pitted (3.2.A1l)

some wear in gear linkage

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Rear Wheel damaged but not significantly reducing the original strength (4.2.1a)