2012 Abarth 500

Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle spring mount cups (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Windscreen washer not working (3.5 (a))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle spring mount cups (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm corroded but not seriously weakened rear beam is corroded heavily (5.3.3 (b) (i))

rear exhaust silencer outer skin corroded

Horn not working (7.7 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm corroded but not seriously weakened rear beam is corroded heavily (5.3.3 (b) (i))

rear exhaust silencer outer skin corroded

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension arm corroded but not seriously weakened rear beam is corroded heavily (5.3.3 (b) (i))

Headlamp aim too low both (4.1.2 (a))

Horn not working (7.7 (a))

Nearside Headlamp insecure (4.1.1 (c))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension arm corroded but not seriously weakened rear beam is corroded heavily (5.3.3 (b) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Ball joint has movement

Offside Front Ball joint has slight movement

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Inner Prop shaft joint constant velocity boot no longer prevents the ingress of dirt both (6.1.7 (g) (ii))

Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Headlamp insecure (4.1.1 (c))

Rear Upper Shock absorbers has an excessively worn bush both (5.3.2 (c))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Rear Brake pad(s) wearing thin (3.5.1g)