MOT Status
ValidMileage
146,486 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Reversing lamp inoperative (4.6.1 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' dangly things (8.3.1e)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
emissions too low to get a reading
rear tyres wearing on inner edges
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DE12 BAA is a 2012 Mazda 3 in White with a 1,560cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 84.6%.
Across all 2012 Mazda 3 models, the average MOT pass rate is 80.6% with a typical mileage of 61,274 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DE12 BAA, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 14 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DE12 BAA?
You can check the full history of DE12 BAA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DE12 BAA registered?
DE12 BAA is a 2012 Mazda 3, first registered on 28 March 2012.
Is DE12 BAA safe to buy?
The MOT history for DE12 BAA shows 13 tests with a 84.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DE12 BAA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DE12 BAA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.