2005 Honda Sh 125-4

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Tyre designed for front wheel use fitted to the rear wheel (5.2.3 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly slightly misaligned (2.3.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly slightly misaligned (2.3.1)

Headlamp aim too high (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Offside Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))