2008 Honda Cbr 125 RW-7

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Exhaust system insecure (6.1.2 (a))

Offside Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected wheel insecure & incorrectly fitted (5.2.1 (c) (ii)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Suspension attachment bracket/mounting slightly loose (5.3.3 (a) (i))

fairings held on by cable ties.

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Headlamp aim too low (4.1.2 (a))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Headlamp aim too far to the left (4.1.2 (a))

Front Headlamp aim too high (4.1.2 (a))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Brake disc contaminated (1.1.14 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Front Direction indicators not working (1.5.1c)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies rear foot brake (1.3.1a)

Headlamp aim too high (1.6)