1987 Honda Cb 125T

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too far to the left (1.6)

Offside Rear Footrest missing (6.2.1a)

Offside Rear Lower Brake locking device missing (3.2.A1e)

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Throttle operating incorrectly (6.2.1f)

Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Rear position lamp damaged but function not impaired (1.1.1b)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

centre stand pivet worn and stand do not return correctly

speedo cable loose and can be trapped by the front disc

Front Brake disc(s) slightly worn (3.2.A1l)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too high (1.6)

Nearside Rear Footrest missing (6.2.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp insecure (1.2.3b)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Drive chain worn but not considered excessive (6.2.1e)

Wheel alignment slightly misaligned. (2.5.1)

no speedo cable fitted