1987 Ford Transit

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Front Seat belt retracting mechanism defective (7.1.2 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Rear diff seal leaking

Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

both front brake back plates corroded

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cill corroded (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Rear diff seal leaking

Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Front SPRING EYE MOUNTINGS CORRODING AND PREVIOUSLY WELDED

Nearside Rear HUB SEAL WEEPING OIL

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Front TYRE PERISHED TO LIMITS 185/14 102/100

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front TYRE PERISHING TO LIMITS 185/14 8 PLY

Nearside Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded NEAR SPRING EYE BUSH AS MARKED. / OUTRIGGER (2.4.A.3)

Nearside Front Front suspension has slight movement at a wishbone pin or bush KINGPIN WEAR (2.5.A.1c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive BY SRING EYE MOUNTING (2.4.A.3)

Offside Front Front suspension has slight movement at a wishbone pin or bush KINGPIN WEAR (2.5.A.1c)

Offside Front STEP CORRODED

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive BY SPRING EYE MOUNTING (2.4.A.3)

Offside Front TYRE PERISHING TO LIMITS 185/14 8 PLY

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

both sills corroded

Battery insecure (1.9.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

presented as class vii

Front Windscreen wiper blade insecure (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion (6.1.B.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)