1987 Austin Mini Park Lane

Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR AREA (6.2.2 (d) (i))

Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR AREA (6.2.2 (d) (i))

Rear Service brake excessively binding (1.2.1 (f))

Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Subframe mounting repair covered in underseal front and rear (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all floor sections (5.3.6 (a) (i))

Brake cable damaged corroded and split (1.1.15 (a))

Hazard warning lamps inoperative (4.4.1 (e))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Subframe mounting repair covered in underseal front and rear (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all floor sections (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases at manifold area (6.1.2 (a))

Nearside Rear Brake cable damaged but not to excess corroded (1.1.15 (a))

Offside Rear Brake cable damaged but not to excess corroded (1.1.15 (a))

Subframe mounting prescribed area is corroded but not considered excessive rear (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive floor sections (5.3.6 (a) (i))

rear exhaust mounting split

Brake cable has wires broken but is not significantly weakened both rear (3.5.1b)

Subframe mounting prescribed area is corroded but not considered excessive rear (2.4.A.3)

floor sections corroded

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake cable has wires broken but is not significantly weakened both rear (3.5.1b)

floor sections corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

REAR SUPPERT MOUNTING SPLIT

both rear radius arms have adjustable camber/tracking brackets fitted

slight noise fom o/s/r hub bearing

EXHAUST SYSTEM POORLY FITTED

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

SLIGHT INSECURITY AT BOTH FRONT SEATS

SLIGHT NOISE AT N/S/F AND O.S/R WHEEL BEARINGS

Steering column top bearing slightly worn (2.1.2c)

FRONT BRAKE DISCS WORN

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

SLIGHT INAECURITY AT BOTH FRONT SEATS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front brake discs are corroded

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

SLIGHT INSECURITY AT FRONT SEATS

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

BOTH FRONT SEATS INSECURITY PRESENT

ELECTRICAL WIRING AT ENGINE BAY UNTIDY

REAR NO PLATE LAMPS DIM

Rear fog lamp slightly discoloured (1.3.2e)

Offside Front Headlamp damaged but light output not reduced (1.7.5a)

Spare tyre defective

Offside Front wheel bearing has excessive play (2.5.A.3c)

rear brake binding (3.7.B.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)