1987 Saab 900

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower wheel arch/ sill/ inner sill (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/ sill end (6.1.1 (c) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner door area (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill x2 holes (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner wheel arch/ sill / inner sill (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/ sill end (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill x2 holes (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner/ outer sill (7.1.1 (a) (i))

Corrosion everywhere under vehicle

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Indicator switch inoperative Does not remain in the on position, not operating correctly (4.4.2 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Indicator switch inoperative (4.4.2 (a) (ii))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced boot floor corroded (6.1.1 (c) (i))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted bumper missing, sharp bracket exposed (6.1.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner structure above exhaust (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rear wing (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole next to drive shaft tunnel (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Offside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced boot floor corroded (6.1.1 (c) (i))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Driver's seat with a defective structure outer sill (6.2.5 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre inner sill/ floor (6.1.1 (c) (i))

Nearside Rear Brake hose bulging under pressure (1.1.12 (d))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Brake hose bulging under pressure (1.1.12 (d))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor/ inner lower wheel arch (5.3.6 (a) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner surface (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Shocker upper mounting (2.4.A.3)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor near trailing arm mounting (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch near link mounting (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing near lower arm mounting (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing near shocker mounting (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor near trailing arm mounting (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner surface (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Shocker upper mounting (2.4.A.3)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Passenger seat(s) missing at time of test ()

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill/ floor at jacking point (6.1.B.2)

Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit worn smooth on inner edge (4.1.E.1)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Tyre worn close to the legal limit worn smooth on inner edge (4.1.E.1)

Offside Front hole in floor but not within a prescribed area

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear tyre cracking

Rear Passenger seat(s) missing at time of test ()

Vehicle structure has slight corrosion (6.1.A.1)

Alternator belt fraying

Corrosion/ holes to boot floor

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front coil spring broken (2.4.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside front parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Alternator belt fraying

Corrosion/ holes to boot floor

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nail in nearside rear tyre

Oil leak

lower rear seat section missing at time of test

rear seat belts missing at time of test

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside front parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nail in nearside rear tyre

Oil leak

lower rear seat section missing at time of test

rear seat belts missing at time of test

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Horn not working (1.6.2a)

Offside Rear Statutory seat belt missing (5.1.1)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Nearside front parking brake recording little or no effort (3.7.B.6a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside front parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Statutory seat belt missing (5.1.1)

Offside Front front brake binding (3.7.B.1)

Offside Rear Statutory seat belt missing (5.1.1)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside front parking brake recording little or no effort (3.7.B.6a)

An item not tested (Manual)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)