1987 Bedford CF2

Nearside Rear ex back box corroded

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

all under body suspension slight corrosion

all underbody heavey underseal

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

exhaust corroded

Brake disc worn, but not excessively both front (1.1.14 (a) (i))

Brake hose slightly deteriorated both front (1.1.12 (b) (ii))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Wheel bearing has slight play both front (5.1.3 (a) (i))

exhaust corroded

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside rear brake grabbing severely (3.7.A.5b)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Registration plate lamp not working (1.1.C.1d)

park brake excess travel

reg plate rear window ??

front bumper end caps insecure >???

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear brake binding (3.7.B.1)

front bumper end caps insecure >???

reg plate rear window ??

ALL ADVISES STILL APPLY AS ON OTHER VTS COMPUTER

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside rear brake binding (3.7.B.1)

Offside Registration plate lamp insecure (1.1.C.1c)

Offside rear brake binding (3.7.B.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

N/S/F AND O/S/F SILL STEP AREA AND INNER WHEEL ARCH/WING AREA IS CORRODED NOT WITH IN 30CM AREA

N/S/F AND O/S/F WHEEL BEARINGS ARE WORN SLIGHT PLAY

REAR INNER WHEEL ARCH AREA IS CORRODED AND HOLED NOT WITH IN 30CM AREA

SLIGHT PLAY N/S/F AND O/S/F UPPER SUSPENSION BALL JOINTS

STRONG SMELL OF PETROL NO LEAKS AT TIME OF MOT

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

front inner wheel arches corroded / not within 30cms component mounts/

near side rear outer wheel arch heavily corroded /not within 30cms of component mounts/

under side undersealed /difficult to inspect /

An item not tested (Manual)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Nearside Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Side repeater not working (1.4.A.2c)

Nearside rear brake binding (3.7.B.1)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Offside Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater not working (1.4.A.2c)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front coil spring corroded (2.4.C.1b)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

front inner wheel arches corroded / not within 30cms component mounts/

near side rear outer wheel arch heavily corroded /not within 30cms of component mounts/

under side undersealed /difficult to inspect /

Body has slight corrosion (6.1.B.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Rear rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.5c)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)