MOT Status
ValidMileage
47,621 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Road spring corroded (5.3.1 (b) (i))
Rear Suspension arm corroded but not seriously weakened swingarm (5.3.3 (b) (i))
exhaust system cracked
Front Tyre worn close to the legal limit (4.1.3(ii))
Front Brake pad(s) close to minimum limit (3.2.A1f(i))
Front Steering movement slightly 'notchy' (2.2.1a)
Rear Rear suspension bush has slight free play (2.4.A2a(i))
slight rub marks on o/s of tyre
Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)
Rear Floor brake test indicates a slightly juddering brake (3.3C2d.)
front and rear brakes binding slightly
h bearings centralising slightly
Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)
Offside Front Brake disc(s) cracked (3.2.A1g)
Front Tyre worn close to the legal limit (4.1.3(ii))
Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
rear tyre has plug in
How Reliable is the Honda ST1100A?
Based on 2,984 MOT tests across 310 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CX51 CNC is a 2001 Honda ST1100A in Red with a 1,084cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 94.4%.
Across all 2001 Honda ST1100A models, the average MOT pass rate is 90.3% with a typical mileage of 37,250 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda ST1100A fails its MOT is tyre tread depth is below minimum requirements of 1.0mm, accounting for 62 recorded failures. If you're considering buying CX51 CNC, it's worth having these areas checked by a mechanic before committing.
The Honda ST1100A typically stays on UK roads for around 29 years. At 25 years old, this Honda ST1100A is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CX51 CNC?
You can check the full history of CX51 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CX51 CNC registered?
CX51 CNC is a 2001 Honda ST1100A, first registered on 16 September 2001.
Is CX51 CNC safe to buy?
The MOT history for CX51 CNC shows 18 tests with a 94.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CX51 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CX51 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.