2004 Honda Cbr 125 R-4

Nearside Clutch lever shortened clutch lever (ball) end missing (6.2.7 (b))

Nearside Front Non obligatory mirror damaged mirror missing/removed ()

Nearside Front Shock absorber has a light misting of oil fork seal leaking (5.3.2 (b))

Offside Front Brake lever is bent but brake can still be readily applied front brake lever bent outwards (1.1.2 (d))

Offside Front Non obligatory mirror damaged mirror missing/removed ()

Offside Front Suspension corroded but not seriously weakened upper fork stanchion (chrome) has light surface corrosion (5.3.3 (b) (i))

Offside Rear Brake pedal is bent but brake can still be readily applied rear brake foot pedal bent (1.1.2 (d))

Offside Rear Exhaust noisy aftermarket silencer fitted - louder than OEM but not excessive (8.1.1 (a))

Drive chain slightly loose chain requires adjustment (6.1.7 (c) (i))

Exhaust noisy aftermarket silencer fitted - louder than OEM but not excessive (8.1.1 (a))

Front Tyre worn close to the legal limit front tyre worn close to wear marker with age related cracking to tread (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened rear disc has surface corrosion & scoring (1.1.14 (a) (ii))

Drive chain slightly loose chain requires adjustment (6.1.7 (c) (i))

Exhaust noisy aftermarket silencer fitted - louder than OEM but not excessive (8.1.1 (a))

Front Tyre worn close to the legal limit front tyre worn close to wear marker with age related cracking to tread (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened rear disc has surface corrosion & scoring (1.1.14 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) registration plate lamp not working - PRS - fit new bulb (4.7.2 (a))

Front Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear Number plate starting to delaminate.

Front Exhaust is leaking and excessively noisey front pipe blowing (7.1.1b)

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Rear Direction indicators not working (1.5.1c)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear Registration plate delaminated (6.3.1.d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Fairings insecure but not likely to impede the steering bolts missing out of fairings (2.1.2e)

Front brake fluid reserivor damage but not leaking

Front headlight tell tail not working

fuel tank loose

Steering movement slightly 'notchy' (2.2.1a)

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Headlamp aim too low (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)