MOT Status
ExpiredMileage
103,850 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Stop lamp slightly discoloured (1.2.1e)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake load sensing valve stiff (3.6.E.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
general under body corosion
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)
Nearside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Side repeater not working (1.4.A.2c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Stop lamp slightly discoloured (1.2.1e)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake load sensing valve stiff (3.6.E.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
general under body corosion
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Shock absorber has negligible damping effect (2.7.5)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake load sensing valve seized (3.6.E.3)
Offside Rear Shock absorber has negligible damping effect (2.7.5)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear brake grabbing severely (3.7.A.5b)
Rear rear brake application uneven (3.7.B.2)
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Mazda B Series?
Based on 136,422 MOT tests across 9,870 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU03 XFG is a 2003 Mazda B Series in Blue with a 2,499cc diesel engine. This vehicle has been through 10 MOT tests with a personal pass rate of 80%.
Across all 2003 Mazda B Series models, the average MOT pass rate is 70.5% with a typical mileage of 84,674 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda B Series fails its MOT is brake pipe excessively corroded, accounting for 9,638 recorded failures. If you're considering buying CU03 XFG, it's worth having these areas checked by a mechanic before committing.
The Mazda B Series typically stays on UK roads for around 38 years. At 23 years old, this Mazda B Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CU03 XFG?
You can check the full history of CU03 XFG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU03 XFG registered?
CU03 XFG is a 2003 Mazda B Series, first registered on 31 March 2003.
Is CU03 XFG safe to buy?
The MOT history for CU03 XFG shows 10 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU03 XFG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU03 XFG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.