2013 Daihatsu Terios

Central Exhaust mounting defective (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension arm corroded but not seriously weakened all link arms on rear heavily corroded (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes perished both sides (5.3.4 (a) (i))

underbody components heavily corroded

Brake pipe corroded, covered in grease or other material corroded - front to rear x2 (1.1.11 (c))

Front Coil spring corroded (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

rear back plates corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Rear fog lamp obviously incorrectly positioned (1.3.2a)

Headlamp aim beam image kick up to the offside (1.8)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)