MOT Status
ExpiredMileage
100,483 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance not tested (1.2.1 (g))
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel pipes heavily corroded
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened ALL OTHER SUSPENSION ARMS HEAVILY CORRODED (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive heavily corroded. sill edge/ floorpan, close inspection not possible (7.1.1 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive heavily corroded (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
WHEEL LINERS & UNDERTRAYS FITTED NOT ALLOWING FULL INSPECTION
Central Rear Standard fitment seat belt missing seat not fitted ()
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
under body, load bearing area, front and rear sub frames and surrounding area is HEAVILY CORRODED
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Inner Prop shaft joint constant velocity boot no longer prevents the ingress of dirt INNER (6.1.7 (g) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Lower Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS
Central Rear Standard fitment seat belt missing seat not fitted ()
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
under body, load bearing area, front and rear sub frames and surrounding area is HEAVILY CORRODED
Front Anti-roll bar pin or bush worn but not resulting in excessive movement horizontal anti roll bar bushes slightly worn (5.3.4 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Inner Brake pad(s) wearing thin appears low, however unable to conduct thorough inspection (1.1.13 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. hand brake performance 17% (1.2.1 (b) (i))
Rear Coil spring corroded both rear (5.3.1 (b) (i))
Rear centre rear seat not fitted
under body, front and rear sub frames and suspension components heavily corroded
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Inner Brake pad(s) wearing thin appears low, however unable to conduct thorough inspection (1.1.13 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. hand brake performance 17% (1.2.1 (b) (i))
Rear Coil spring corroded both rear (5.3.1 (b) (i))
Rear centre rear seat not fitted
under body, front and rear sub frames and suspension components heavily corroded
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Windscreen wiper blade missing (3.4 (b) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Shock absorber has a light misting of oil Soft DAMPING (2.7.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
rear tyres perished
NEARSIDE REAR UNEVEN OUTER EDGE WEAR
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Engine covers fitted obscuring some components in the engine bay
Passenger seat(s) missing at time of test
Under-trays fitted obscuring some underside components
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Passenger seat(s) missing at time of test
Under-trays fitted obscuring some underside components
Corrosion on floorpan
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Ends torn offside wiper blade
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Vehicle's internal headlight adjuster altered to recheck lights
Brakes imbalanced across an axle (3.7.B.5b)
Ends torn offside wiper blade
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Vehicle's internal headlight adjuster altered to recheck lights
nearside rear tyre wearing on outer edge
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP07 YTE is a 2007 Mazda 5 in Silver with a 1,798cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2007 Mazda 5 models, the average MOT pass rate is 68.5% with a typical mileage of 76,301 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying CP07 YTE, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 19 years old, this Mazda 5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP07 YTE?
You can check the full history of CP07 YTE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP07 YTE registered?
CP07 YTE is a 2007 Mazda 5, first registered on 16 August 2007.
Is CP07 YTE safe to buy?
The MOT history for CP07 YTE shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP07 YTE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP07 YTE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.