2006 Triumph Speed Triple

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements undersized (0.1 (d))

Front Tyre tread depth is below minimum requirements of 1.0mm on right side (5.2.3 (e)) DANGEROUS

Rear Inner Brake pad(s) close to minimum limit (1.1.13 (a))

Horn not working (7.7 (a))

Rear Inner Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Shock absorber has a light misting of oil Both front forks slightly misted (5.3.2 (b))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a light misting of oil both (5.3.2 (b))

Rear Position lamp light intensity obviously reduced some LEDs inoperative (4.2.3 (a) (i))

Stop lamp light intensity obviously reduced some LEDs inoperative (4.3.3 (a) (i))

all indicators loose but secure

all indicators poorly fitted

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a serious fluid leak both (5.3.2 (b))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Offside Rear direction indicator slightly loose

Exhaust noisy (7.1.2)

Rear position lamp deteriorated but function not impaired Some of the leds lights not working,Over 50% of the leds our working ok! (1.1.1b)

Exhaust noisy (7.1.2)

Rear position lamp deteriorated but function not impaired Some of the leds lights not working,Over 50% of the leds our working ok! (1.1.1b)

Horn not working (1.7.3a)

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Brake fluid reservoir insecurely mounted (3.2.B1a)

Fuel cap does not fasten securely by a positive means (7.2.2b)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not emit a steady light (1.3.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

front tyre uneven wear

rear tyre 2mm thread

rear tyre uneven wear

Drive chain slightly loose (6.2.1d)