2004 Piaggio Liberty 125

Exhaust excessively deteriorated (7.1.1a)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Registration plate insecure (6.3.1b)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Front Tyre has ply or cord exposed (4.1.2a(iii)

Headlamp aim too low (1.6)

Offside Steering lock stop ineffective (2.1.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake component is slightly corroded (3.1.5)

Lower Motorcycle structure slightly corroded (6.1.1a)

Offside Front Direction indicator slightly discoloured (1.5.1b)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Upper Front suspension assembly slightly corroded. (2.3.1)

lower bolt missing exhaust

slight corrosion rear shock

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Direction indicators not working (1.5.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Registration plate deteriorated (6.3.1d)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Indicator tell tale not functioning (1.5.2)