2011 Mitsubishi Asx

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Electrical wiring insecure (4.11 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Electrical wiring insecure (4.11 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive N/s & O/s (5.3.6 (a) (i))

Undertray not fully secure (8.1.1 (b) (i))

Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension arm pin or bush likely to become detached Trailing Arm Bush Casing Corroded (5.3.4 (a) (ii)) DANGEROUS

Offside Rear Suspension arm pin or bush likely to become detached Trailing Arm Bush Casing Corroded (5.3.4 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Electrical wiring insecure (4.11 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Electrical wiring insecure (4.11 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive N/s & O/s (5.3.6 (a) (i))

Undertray not fully secure (8.1.1 (b) (i))

Central Rear Exhaust system insecure (6.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear exhaust deteriorated

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust deteriorated

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both D-bushes (5.3.4 (a) (i))

rear exhaust corroded, at join

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear exhaust joint rusty

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)