MOT Status
ExpiredMileage
112,601 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired cross member (6.2.2 (d) (ii)) DANGEROUS
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Brake pedal has insufficient reserve travel (1.1.2 (a))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around rear shackle (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber (5.3.6 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around rear shackle (5.3.6 (a) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front leaf spring mount (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by load valve (6.1.1 (c) (ii)) DANGEROUS
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside windscreen damage X2
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Power steering component has slight seepage from a component steering box (2.1.5 (a))
Steering box has slight free play detected at steering wheel (2.3 (a) (i))
engine oil low
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' X2 (8.3.1d)
engine oil low
Brake load sensing valve seized (3.6.E.3)
Exhaust system not adequately supported rear silencer (7.1.1)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Leaf spring to axle securing nut insecure front nut (2.4.B.7b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) DANGEROUS
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' X2 (8.3.1d)
engine oil low
Brake pipe slightly corroded front to back (3.6.B.2c)
Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Rear fog lamp switch faulty (1.3.1a)
Nearside Rear Leaf spring fractured (2.4.B.1a) DANGEROUS
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Brake pipe slightly corroded front to back (3.6.B.2c)
Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nail in n/s/f tyre
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Stop lamp not working (1.2.1b)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pipe excessively corroded on axle (3.6.B.2c)
Rear fog lamp not working (1.3.2b)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nail in n/s/f tyre
Both rear leaf spring mounting points corroded but not excessive at this point.
Front radiator support panel corroded and holed
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear fog lamp not working (1.3.2b)
Rear Brake pipe excessively corroded (3.6.B.2c)
Both rear leaf spring mounting points corroded but not excessive at this point.
Front radiator support panel corroded and holed
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Mazda B Series?
Based on 136,422 MOT tests across 9,870 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK03 HSC is a 2003 Mazda B Series in Blue with a 2,499cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Mazda B Series models, the average MOT pass rate is 70.5% with a typical mileage of 84,674 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda B Series fails its MOT is brake pipe excessively corroded, accounting for 9,638 recorded failures. If you're considering buying CK03 HSC, it's worth having these areas checked by a mechanic before committing.
The Mazda B Series typically stays on UK roads for around 38 years. At 23 years old, this Mazda B Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CK03 HSC?
You can check the full history of CK03 HSC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK03 HSC registered?
CK03 HSC is a 2003 Mazda B Series, first registered on 31 March 2003.
Is CK03 HSC safe to buy?
The MOT history for CK03 HSC shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK03 HSC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK03 HSC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.