2005 Mazda 3

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

both sides rear inner wheel arches covered with heavily sealant

front & rear suspensions components slightly corroded

vehicle under body surface rust

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Stop lamp(s) not working o/s & n/s (4.3.1 (a) (ii))

both sides rear inner wheel arches covered with heavily sealant

front & rear suspensions components slightly corroded

vehicle under body surface rust

Rear Wheel arches corroded

Vehicle has corrosion all round chassis and sill areas

Rear Registration plate lamp insecure (1.1.C.1c)

Rear Wheel arches corroded

Vehicle has corrosion all round chassis and sill areas

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Rear tyre nail in side wall

Rear Brake lining(s) wearing thin (3.5.1g)

both rear inner sills corroded

rear subframe and suspension arms corroded

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear tyre nail in side wall

Rear Brake lining(s) wearing thin (3.5.1g)

both rear inner sills corroded

rear subframe and suspension arms corroded

WIPERS NOT TESTED.

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front front brake binding (3.7.B.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

WIPERS NOT TESTED.

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight lip to discs,

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

slight lip to discs,

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Seat belt retracting mechanism defective (5.2.5b)

Offside Stop lamp not working (1.2.1b)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Rear Exhaust mounting missing (7.1.1b)