2008 Yamaha Yzf

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

exhaust noisey

Exhaust noisy (7.1.2)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has excessive free play (2.2.2)

Exhaust noisy (7.1.2)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Exhaust noisy (7.1.2)

Rear Brake component has been modified. (3.1.5)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

play in rear caliber

Front wheel spindle loose (2.3.5a) DANGEROUS

Exhaust noisy (7.1.2)

Rear Brake component has been modified. (3.1.5)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

play in rear caliber

Steering headbearing has excessive free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively tight (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Footrest missing (6.2.1a)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))