2011 Honda Cbr 125 Rw-b

Front Brake lever pivot slightly tight (1.1.1 (a))

Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Headlamp incorrect colour (4.1.4 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Rear Footrest missing (6.2.12 (a))

O/S/F faring panel slightly loose. Flasher unit loose and hanging down.

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Shock absorber has a light misting of oil fork seals (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm has slight corrosion (6.1.1 (c) (i))

Horn not working (7.7 (a) (ii))

Offside Rear Direction indicator adversely affected by the operation of another lamp with reg plate lamp (4.4.3 (b))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Front Shock absorber has a light misting of oil fork seals (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm has slight corrosion (6.1.1 (c) (i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii)) DANGEROUS