MOT Status
ExpiredMileage
79,802 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced front and rear at various points (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Registration plate inscription illegible (0.1 (b))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal (6.2.2 (d) (i))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Windscreen washer not working (3.5 (a))
Front Brake pad(s) less than 1.5 mm thick both sides (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced front and rear at various points (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened Front discs corroded (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
General corrosion to underside of body.
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Nail in tyre ()
Nearside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension component mounting repair covered in underseal Both sills have previous repairs (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases Rear box (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Front Slight roughness in top mount
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal panel (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Seal panel (7.1.1 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Exhaust has a minor leak of exhaust gases Rear box (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Front Slight roughness in top mount
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
both front wipers are split
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Wheel nut(s) missing (4.2.A.1e)
Nearside Rear Wheel nut(s) missing (4.2.A.1e)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Offside Rear Wheel nut(s) missing (4.2.A.1e)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
both front wipers are split
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE57 BVP is a 2007 Dodge Caliber in Silver with a 1,798cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2007 Dodge Caliber models, the average MOT pass rate is 66.5% with a typical mileage of 66,005 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying CE57 BVP, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 19 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CE57 BVP?
You can check the full history of CE57 BVP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE57 BVP registered?
CE57 BVP is a 2007 Dodge Caliber, first registered on 1 September 2007.
Is CE57 BVP safe to buy?
The MOT history for CE57 BVP shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE57 BVP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE57 BVP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.