2006 Honda Cbf 1000 A-6

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Position lamp not working (4.2.1 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort At maximum allowable fluctuation. (3.3.A1d)

Front Slight binding of front brake.

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust slightly deteriorated (7.1.1a)

Rear Brake disc(s) has slight run out (3.2.A1m)

Steering movement slightly 'notchy' (2.2.1b)

exhaust clamp broken but system not leaking

exhaust clamp missing but system not leaking

Nail in rear tyre

Rear Brake disc(s) slightly pitted (3.2.A1l)

Drive chain excessively tight (6.2.1d)

Headlamp aim too high (1.6)

Nearside Rear Exhaust mounting missing (7.1.1c)

Offside Rear Exhaust mounting missing (7.1.1c)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

rear brake pads getting low

Drive chain excessively loose (6.2.1d)

rear brake pads getting low

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)