2003 Honda Cb 600 F-3

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a))

Rear Brake lagging in operation (1.2.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Tyre 13 years old

Front Tyre contaminated with silicone type substance.

Rear Tyre contaminated with silicone type substance.

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Stop lamp not working (4.3.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Steering headbearing has slight free play (2.2.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

Offside Rear Direction indicator incorrect colour (1.5.1b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))