2017 Qingqi Qm

Clutch lever bent (6.2.7 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust slightly loose (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp deteriorated

Nearside Front Direction indicator insecure (4.4.1 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement Rear linkage (5.3.4 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Lower Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Stop lamp not working (4.3.1 (a) (ii))

Wheel alignment incorrect which adversely affects the handling Suspect frame bent at headstock (2.4 (a))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected Idles incorrectly and high (6.2.7 (a) (ii)) DANGEROUS

Brake excessively binding forwards not backwards (1.2.1 (f))

Drive chain sprocket worn to excess both (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake grabbing severely (1.2.1 (c))

Front Stop lamp not working (4.3.1 (a) (ii))

Nearside Rear Direction indicator missing (4.4.1 (a) (ii))

Nearside Suspension component damaged and seriously weakened sprocket nut worn through swingarm (5.3.3 (b) (i))

Offside Motorcycle structure joining/attachment plate or fastening insecure chain adjuster plate and nuts missing (6.1.1 (b) (i))

Offside Rear Direction indicator missing (4.4.1 (a) (ii))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Tyre fouling another component chain rubbing tyre wheel alignment way out (5.2.3 (f))

Wheel alignment incorrect which adversely affects the handling chain adjustment way out (2.4 (a))

Wheel alignment incorrect which adversely affects the steering front forks and handlebar twiced (2.4 (a))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm 130/70/17 (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle loose on handlebar (6.2.7 (a) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp lens slightly defective (4.1.1 (b) (i))