2010 Yamaha Yzf

Exhaust noisy (8.1.1 (a))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

fairing insecure

Drive chain excessively loose (6.1.7 (c) (i))

Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))

Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

fairing insecure

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake binding but not excessively (1.2.1 (f))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake binding but not excessively (1.2.1 (f))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake cylinder inadequately mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Clutch lever shortened (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Direction indicator insecure (1.5.3b)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Direction indicator insecure (1.5.3b)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Footrest missing (6.2.1a)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre valve stem slightly damaged (4.1.2c)

Offside Front Direction indicator not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre valve stem slightly damaged (4.1.2c)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Front Footrest insecure (6.2.1a)

Rear Footrest missing (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)