1985 Honda CB100

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake lever has insufficient reserve travel (1.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel spoke slightly corroded both (5.2.2 (d))

Wheel spoke slightly corroded both (5.2.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel spoke slightly corroded both (5.2.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake cable outer casing slightly damaged (3.2.A1b)

Drive chain slightly loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Wheel corroded but not significantly reducing the original strength (4.2.1a)

Steering movement slightly 'notchy' (2.2.1a)