1993 Honda Civic

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced across an axle (3.7.B.5b)

Front front brake juddering severely (3.7.A.2b)

Front registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator insecure (1.4.A.2b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Obligatory mirror insecure (8.1.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Parking brake lever has no reserve travel (3.1.6b)

Rear Registration plate lamp insecure (1.1.C.1c)

Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all coil springs corroded

both front tyres just on legal limit + outer edge wearing low,will need to be changed very soon

both rear bottom shocker bushes slightly perished

engine manegement light staying on

nearside front + offside front bottom shocker bushes slightly perished

nearside rear flexi hose corroded

oil leak

rear brake discs coroded

rear bumper insecure

unable to check brake pipes properley due to some sort of covering over them

unable to check outer sills properley due to plastic coverings over them

unable to check under vehicle floor properley due to some sort of covering over it

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Obligatory mirror insecure (8.1.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp aim too low (1.8)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside rear brake binding (3.7.B.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Registration plate lamp not working (1.1.5c)

Rear registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Front Brake pad(s) wearing thin (3.5.1g)

front and rear bummpers loose